Guides for Mercedes-Benz & BMW parts buyers

How to identify the right part before you order it, what fails first on the systems that come through a workshop most often, and what to ask a supplier before you send money. Written for workshops, distributors and online sellers — no filler.

How-to

5 guides
Engine Mount
How-to
Engine mount symptoms: how to tell a mount has failed

The workshop reports bad engine mount symptoms and asks for one part—but which unit is actually wanted, of what design, and under which chassis code should it be found? This article follows the sequence of recognizing the symptoms, ruling out look-alike faults, distinguishing the designs, settling how many to replace, narrowing the field by chassis code and completing the order information, and answers the questions a parts buyer has to settle before anything is ordered.

21 min read·Updated 2026-11-11
Air Suspension
How-to
Air suspension: is it the strut, the compressor, or the valve block?

How to tell which of the three has failed from the symptom alone, why a new compressor dies without a leak fix, and the order to diagnose in.

3 min read·Updated 2026-11-11
Water Pump
How-to
Cooling system on modern Mercedes-Benz and BMW: what fails first

Why plastic and heat cycles decide the failure order, what to replace while the system is already open, and the bleeding mistake that cooks a new water pump.

3 min read·Updated 2026-11-11
Alternator
How-to
Bad Alternator Symptoms: How to Test Before You Order a Replacement

The workshop says the battery light is on—but exactly what part needs to be replaced: a generator, a battery, a belt, or a wire? This article explains, in the following order—identifying symptoms, ruling out peripheral components, conducting sequential tests, verifying part numbers, and placing an order—the key questions that parts buyers must clarify before placing an order.

25 min read·Updated 2026-11-10
Oil Filter Housing
How-to
Oil Filter Housing Gasket Leak: Finding the Source Before You Order the Part

When a workshop reports a leaking oil filter housing, what belongs on the order is either a seal kit or the complete housing. The sequence that follows—locating the leak, reading the housing layout, verifying the part number and placing the order—answers the questions a parts buyer has to settle before anything is ordered.

17 min read·Updated 2026-11-10

Reference

2 guides

Buying guide

2 guides

Still not sure which number you need? Send us the VIN or a photo of the old part — request availability and price.

Got a part number? Send it over.

We'll tell you if we have it, what it costs, and when it ships — within 4 hours during business hours.

Request availability & price
Request availability & price →